36
6.
Save Disk Space
(Enable/Disable): The setting allows you to save disk space. The file size
of “
Save Disk Enable
” is 2.6 times smaller than “
Save Disk Disable
”.
7.
Sensitivity
(10/20/30/40/50/60/70/80/90/100): You can set the sensitivity of motion
detection during recording. It is recommended to adjust the setting to 100 in order to
prevent any data loss. However, in some special conditions, the system continues to record
even when no motion has occurred. This will result in a considerable amount of useless
data being recorded. In such a case, it is recommended to lower the sensitivity setting to
avoid wasting hard disk
8.
Digital Signature
(Enable/Disable): The setting allows you to encrypt digital signature
(watermark) to the video content.
9.
Resolution
(320
×
240/640*240/640
×
480)
: You can adjust the recording resolution. The
higher the number, the better the quality. However, the higher quality setting will consume
more hard disk space.
10.
Frame Rate
(0.2/0.5/1/2/3/4/5/6/7/8/10/12/15/20/25/max): You can adjust the recording
frame rate for fully recording mode and event recording mode. The higher the number is,
the higher frame rate it will be recorded. However, with higher frame rate, the hard disk
space will be consumed faster.
10-1 Fully Recording
You can set frame rate for fully recording mode.
10-2 Event Recording
(1)
Events (Motion/DI): allow you to choose events that you would like to record.
(2)
Event Occur: allows you to set recording frame rate when event occurs.
(3)
Event Not Occur: allows you to set recording frame rate when event does not
occur. There are two options to select. One is “pre/pos Recording and the other
one is “Low frame Rate recording. For the pre-Record setting
(0/1/2/3/4/5/6/7/8/9/10) is to record a certain seconds before an alarm happens.
And post-Record setting (0/1/2/3/4/5/8/10/15/20) is to record a certain seconds
after an alarm happens.
