HyperPAC™ User Manual
www.hypertech.com
Getting Started and System Setup
Every time the unit first powers up the screen will display the HyperPAC™ logo for
about 10 seconds while the system boots up. This process is necessary because the
HyperPAC™ is not just a tuning programmer; but it is truly a “mini” computer with its on
operating system similar to a PC. That is how the HyperPAC™ got its name, the “pac”
in HyperPAC™ stands for “Performance Automotive Computer” and add HYPER to the
front and you have the “Hypertech Performance Automotive Computer.”
After the system boots up the unit will display the welcome screen and then lead you
through some system setup screens. This setup process will only take place the first
time you use your HyperPAC™.
After the initial setup has been performed the unit will always go directly to the
HyperPAC™ Main Menu after the system boots up.
If you ever need to change any of the setup parameters you can access them through
the VEHICLE/OWNER INFORMATION button on the main menu.
• (901) 382-8888
Page 7 of 66
