HyperPAC™ User Manual
www.hypertech.com
Staging the vehicle and making a Run
After verifying that all of your settings are correct, Touch STAGE VEHICLE to prepare to
make a run.
The Staging Lane screen will display a racetrack “christmas tree” on the right-hand side
of the screen and the Engine Monitor will show important operating conditions on the
left-hand side.
Note: The items shown in the Engine Monitor window can vary depending on vehicle year, make, and
model.
Staging Lane
Session 10/11/04_1 run # x
BACK
End
Session
HELP
RUN
NOTES
START
TREE
RPM
Throttle Pos ition
Engine Coolant
Tr ans mis s ion Fluid
A mbient A ir
Intake A ir
En g in e M o n ito r
1.
Bring the vehicle to a complete stop positioned on the starting line. With the brake
pedal depressed, raise the engine RPM to the desired speed at which you want to leave
the starting line. When you are staged and ready to make a run, touch START TREE.
2.
The first stage light will come on.
3.
The second stage light will come on after the HyperPAC™ verifies that the vehicle is
not in motion.
4.
The tree will begin 1 second after the second stage light comes on. Audible tones will
sound in .5 second intervals with each yellow light and then a slightly longer tone for the
green light. The standard “Sportsman” tree is the default setting, if you select the “Pro”
tree all three
(yellow) lights will come on simultaneously 1 second after the second
staging light comes on. The
(green) and
(red) lights operate as normal.
NOTE: For greater accuracy and consistency between runs use the Engine Monitor window to view the
real-time data conditions to start each run with the same operating temperatures.
• (901) 382-8888
Page 35 of 66
