HyperPAC™ User Manual
www.hypertech.com
View Changes & Program New Settings
Engine Power Tuning
= Hypertech Regular
RPM Rev Limiter
= +200 RPM
1 - 2 Shift
= +10 MPH
2 - 3 Shift
= +12 MPH
3 - 4 Shift
= Stock
Shift Firmness
= Level 3
Top Speed Limiter
= H-Rated 128 MPH
Current Tire Size
= P225/50/16
Current Gear Ratio
= Stock
New Performance Selections are Highlighted
BACK
MAIN
MENU
HELP
MAKE
CHANGES
START
PROGRAMMING
If all of the changes are correct touch START PROGRAMMING to begin the
programming process. The HyperPAC™ will lead you through some simple instructions
screens requiring you to cycle the ignition on and off, simply follow the instructions on
the screen. These Instruction screens may vary depending upon Year, Make, & Model
and are not shown in this manual.
IMPORTANT:
-DO NOT leave the vehicle while
programming is in process.
-Make sure the vehicle battery is
FULLY
charged BEFORE programming.
-DO NOT operate electrical
accessories (radio,
windows, wipers, etc.) while
programming.
-DO NOT attempt programming
while the vehicle is connected to a
battery charger.
If you wish to make more changes before programming the vehicle, touch MAKE
CHANGES.
NOTE: The programming process takes approximately 5 minutes.
The vehicle’s engine cannot be running during the programming process.
Never leave the vehicle unattended during the programming process.
• (901) 382-8888
Page 28 of 66
