16 |
P a g e
LED, Jumpers & Buttons and Connectors Functionality
See the page 14, the
“
Detailed Motherboard Layout
” for the item numbers.
7.1 LED Functionality
Item
LED
Status
3
BMC LED
Flashing Green = Activated
8
FIVR Fault LED
Solid Green = Normal
No Light = Power board Error
9
CPU Thermaltrip LED
Off = Normal
Solid Red = Error
10
Processor Hot LED
Off = Normal
Solid Red = Error
14
CPU Error LED
Off = Normal
Solid Red = Error
22
M.2 Port 1 LED
Off = No activity
Flashing Green = Activity
25
M.2 Port 2 LED
Off = No activity
Flashing Green = Activity
36
CPU CAT Error LED
Off = Normal
Solid Red = Error
38
Memory Error LED
Off = Normal
Solid Red = Error
7.2 Jumpers & Buttons Functionality
Item
Jumper / Button
Description
7
Clear CMOS
Clear CMOS Jumper
See Page 16 - (How to clear the CMOS with battery and jumper)
16
Reset Button
System board reset
17
Power Button
System board power
BIOS Recovery
If Bios flash fails or system cannot boot up, this feature could flash
BIOS using Bios setup menu.
= Normal Mode (Default)
= Recovery Mode
Boot Save Mode
Allow the CPU to wake up safely by disabling all the clock gating
and is a debug signal.
= Normal Mode (Default)
= Disabled All clocks
Case Open
Allows the Case Open sensors information to enable.
= Disabled Mode (Default)
= Enabled the Case Open Sensors
ME Recovery
ME entering recovery mode
Summary of Contents for CIARA ORION HF310-G4
