60 |
P a g e
29.8 Time Settings
This page provides the mechanism to configure the Network Time acquisition method. With Administrator or Operator privilege level, you can modify configuration
settings and click the
Apply Changes
button to execute the settings, as well as click the
Sync Time Now
button (when in
Requested Mode
) to request an immediate
clock set.
29.8.1 Operation Mode
Configures the NTP Mode. You can Disable NTP, set
Requested Mode
, or
Daemon Mode
in this parameter.
In
Requested Mode
, you can request an immediate clock synchronization with the NTP server; request will be sent when click the Sync Time Now button.
The
Daemon Mode
runs NTP daemon, which sends a NTP request at approximately 5-minute intervals. Multiple NTP servers may be specified to provide redundancy.
29.8.2 Time Synchronization Method
Specifies the synchronization method for Requested Mode. Select
Slew mode
when you want to adjust the time smoothly over time if there are time sensitive
applications in place. Select
Step
mode
to aggressively change the time using settimeofday() system call.
Summary of Contents for CIARA ORION HF310-G4
