HyperSID Manual - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -HyperSynth
(HW Unit)
About this manual
In this manual we focus on the musical side of the HyperSID not the technical
information about the hardware unit so the thing you need to understand is that this
manual is a little experience about VSTi and hosts.
This manual assumes you have some knowledge about subtractive analog type
synthesizers, so it does not go into the depth of certain concepts such as how
waveforms are constructed or how filter modes work in detail. There are plenty of
resources on the Internet for information about the craft of sound synthesis.
Installation
Minimum system requirements:
HyperSID HW unit
Processor: Pentium III/AMD with SSE support
Processor speed: 1.2 GHz
RAM (Cache): 256 MB RAM
Operating system: Windows 2000 or XP
Host application: Cubase VST 3.7 or higher or
Other VST 2.0 compatible host software
Other Components: PC equipped according
To the specifications of the host software
Note:
HyperSID is optimized with SSE2 instructions so it has a better performance on P4
machine or compatible processors with SSE2.
Installing on a PC:
1.
Download and run HyperSID (v1.0).exe from the download page at
www.hypersynth.com
.
2.
The installer will suggest a path to install the plug-in into.
3.
If the path is correct, select <Start> else browse to the path where you keep your VST
plug-ins and then select <Start>.
4.
HyperSID is ready to use in your host now.
Note:
HyperSID can be used as a stand-alone application, independent
of any host
application. The Standalone version is also available for download in our website.
