Exhibit D: Enabling Manager Password
Option 2: Set Hard Coded Terminal Password
This option adds a hard coded password prompt to the terminal itself so
only users who input the correct password can even access the Load
Value screens. Follow the instructions below:
1. From the loyalty program main menu, press the down arrow and
select
Setup Menu
.
2. Select
TERMINAL
and when prompted, enter default Manager
Password of
92266831
and press Enter. If you already changed the
default Manager password, then enter the new password value here
instead of 92266831.
3. Select
NEXT
until you see
ENABLE MANAGER PWD?
Click
EDIT
and observe value. The value should be set to
1
to enable the
password over Load Value functions or set to
0
to disable it. Press
the desired value on the keypad and select
ENTER
to save changes.
4. Select
NEXT
until you see
MANAGER PASSWORD
. Click Edit and
observe value. Change the default password to any combination of
digits you like that only authorized users will know. Press
ENTER
to
save changes.
Summary of Contents for T4205 Dial
Page 1: ...The Checklist...
Page 30: ......
