manualshive.com logo in svg

Hyper Rip Rail, Owner'S Manual

Share
Download
Hyper Rip Rail Owner'S Manual Download Page 33

Repair and Service 

WHEELS

Wheel Inspection

It is most important that wheels are kept in top condition.  Properly maintaining your BMX Scooter's wheels 
will help braking performance and stability when riding.  Be aware of the following potential problems:

Dirty or greasy rims:
Caution:

  These can render your brakes ineffective.  Do not clean them with oily or greasy materials.  

When cleaning, use a clean rage or wash with soapy water, rinse and air dry.  Don't ride while they're wet.
When lubricating your BMX Scooter, don't get oil on the rim braking surfaces.

Wheels not straight:

Lift each wheel off the ground and spin them to see if they are crooked or out of round.  If wheels are not 
straight, they will need to be adjusted.  This is quite difficult and is best left to a BMX Scooter specialist.

Broken or loose spokes:

Check that all spokes are tight and that none are missing or damaged. 
Caution:  Such damage can result in severe instability and possibly an accident if not corrected.
Again, BMX Scooter specialist best handles spoke repairs.

Loose hub bearings:

Lift each wheel off the ground and try to move the wheel from side to side.

Caution:

  If there is movement between the axle and the hub, do not ride the

BMX Scooter.  Adjustment is required.

Axle nuts:

Check that these are tight before each ride.

A

D

JU

S

T

M

E

N

T

P

A

G

E

31

BMX Scooter

ASSEMBLY 

Summary of Contents for Rip Rail





































Reviews:

No comments

Brands by name

Popular brands

Load more brands