manualshive.com logo in svg

Hyper Rip Rail, Owner'S Manual

Share
Download
Hyper Rip Rail Owner'S Manual Download Page 31

Maintenance: 

Frequently check the bearings of the BMX Scooter.  Have a bicycle service shop lubricate 

the bearings once a year or any time they do not pass the following tests.

Head Tube Bearings: 

The fork should turn freely and smoothly at all times.  With the front wheel off 

the ground, you should not be able to move the fork up, down, or side-to-side in the head tube.

Wheel Bearings: 

Lift each end of the BMX Scooter off the ground and slowly spin the raised wheel by 

hand.  The bearings are correctly adjusted if:

The wheel spins freely and easily. The weight of the spoke reflector, when you put it toward the front or 
rear of the BMX Scooter, causes the wheel to spin back and forth several times. There is no side-to-side 
movement at the wheel rim when you push it to the side with light force.
 

     WARNING:  Do not over lubricate.  If oil gets on the wheel rims or the brake shoes, it will 
      reduce brake performance and a longer distance to stop the BMX Scooter will be 
necessary.  Injury to the rider or to others can occur.

Keep all oil off the surfaces of the foot deck where your feet rest.

Using soap and hot water, wash all oil off the wheel rims, the brake shoes, and the tires.  Rinse with clean 
water and dry completely before you ride the BMX Scooter.

Inspection of Bearings

Lubrication / Maintenance 

P

A

G

E

29

A

D

JU

S

T

M

E

N

T

BMX Scooter

ASSEMBLY 

Summary of Contents for Rip Rail





































Reviews:

No comments

Brands by name

Popular brands

Load more brands