Maintenance
Frequently check the tire inflation pressure because all tires lose air slowly over
time. For extended storage, keep the weight of the BMX Scooter off the tires.
WARNING: Do not ride or sit on the BMX Scooter if either inner tube is under
inflated. This can damage the tire and inner tube. Do not use unregulated air hoses to
inflate the inner tubes. An unregulated hose can suddenly over inflate BMX Scooter
tires and cause them to burst.
Use a hand or a foot pump to inflate the inner tubes. Service station meter-regulated air hoses
are also acceptable. The correct inflation pressure is shown on the tire sidewall.
Before adding air to any tire, make sure the edge of the tire (the bead) is the same distance from
the rim, all around the rim, on both sides of the tire. If the tire does not appear to be seated
correctly, release air from the inner tube until you can push the bead of the tire into the rim where
necessary. Add air slowly and stop frequently to check the tire sealing and the pressure, until you
reach the correct inflation pressure as indicated on the tire sidewall.
Replace worn or defective
tires and inner tubes.
Tires
P
A
G
E
28
T
O
O
L
S
TOOLS
REQUIRED
