HYOSUNG RT 125 D, Service Manual

Page: 41 / 94

40
3-17 ENGINE
Service limit
0.180 mm (0.007 in)
0.150 mm (0.006 in)
Piston ring-groove clearance
1st
2nd
⊙ ⊙
PISTON RING TO GROOVE
CLEARANCE INSPECTION
Remove carbon deposit both from the piston ring and
its groove.
Fit the piston ring into the groove. With the ring com-
pressed and lifted up, measure the clearance on the
bottom side of the ring using a thickness gauge.
If any clearance reading exceeds the service limt,
replace both the piston and piston rings.
Standard
Piston ring thickness
Standard
Piston ring groove width
Oil
2nd
1st
2.01 ~ 2.03 mm
(0.079 ~ 0.080 in)
1.01 ~ 1.03 mm
(0.040 ~ 0.041 in)
1.01 ~ 1.03 mm
(0.040 ~ 0.041 in)
2nd
1st
0.970 ~ 0.990 mm
(0.0382 ~ 0.0390 in)
0.970 ~ 0.990 mm
(0.0382 ~ 0.0390 in)
Micrometer(0~25 mm) : 09900-20201
Thickness gauge : 09900-20806