HYOSUNG RT 125 D, Service Manual

Page: 28 / 94

27
ENGINE
ENGINE REMOVAL AND REMOUNTING
………………………
28 (3-5)
ENGINE REMOUNTING
………………………………………………
28 (3-5)
UPPER END COMPONENTS OF ENGINE DISASSEMBLY
29 (3-6)
UPPER END COMPONENTS OF ENGINE INSPECTION
AND SERVICING
……………………………………………………… 34 (3-11)
UPPER END COMPONENTS OF ENGINE REASSEMBLY
44(3-21)
LEFT END COMPONENTS OF ENGINE DISASSEMBLY
54 (3-31)
RIGHT END COMPONENTS OF ENGINE DISASSEMBLY
57 (3-34)
LOWER END COMPONENTS OF ENGINE DISASSEMBLY
60 (3-37)
LOWER END COMPONENTS OF ENGINE INSPECTION
AND SERVICING
………………………………………………………
63 (3-40)
LOWER END COMPONENTS OF ENGINE REASSEMBLY
66 (3-43)
RIGHT END COMPONENTS OF ENGINE REASSEMBLY
71 (3-48)
LEFT END COMPONENTS OF ENGINE REASSEMBLY
75 (3-52)
3
CONTENTS
CAUTION
Mark an identification of assembly location on each removed part so that each will be restored to the
original position during reassembly.
Wash clean and dry the removed parts before inspecting and measuring.
Oil the rotating or sliding parts before assembly.
Make sure to use the correct type of lubricant where specified.
Check that each rotating or sliding part moves or operates smoothly after assembly.
Make sure to follow the bolt tightening order where specified.
If the correct length of the bolt is confused when tightening the crankcase or cover, insert all the bolts
and check that the tightening margin is equal in each bolt.