HYOSUNG MONiMAX8100T, Operator'S Manual

Page: 43 / 110

Chapter4. Receipt Printer (SPR60) Operator Manual
4-6 © Hyosung TNS Inc. All Rights Reserved.
<Mark sensor>
1 Right mark sensor on the thermal side
2 Left mark sensor on the thermal side
3 Middle mark sensor on the thermal side
4 Mark sensor on the non-thermal side
Notice:
1. The mark sensor on non-thermal side is the default sensor when delivery from the factory, and the
middle mark sensor on thermal side is used as paper feeding sensor;
2. The middle mark sensor on thermal side is optional, while only one of the other three sensors can
be installed.
Notice:
1. Please use the recommended paper or its equivalents. Using other types of paper may affect print
quality and reduce the print head lifetime;
2. Do not paste the paper to the shaft core;
3. If the paper comes in contact with chemical or oil, it may discolor or be less heat sensitive, which
will greatly affect the print quality;
4. Do not rub the paper surface with a nail or hard metal. Otherwise it may discolor;
5. When the temperature goes up to 70
℃
, paper will discolor. So please be careful to the effect of
temperature, humidity and sunlight in environment.