HYOSUNG GD250, Owner'S Manual

Page: 69 / 98

68
5. Check the electrode gap with a
thickness gauge. The gap must be 0.7 ~
0.8 mm (0.028 ~ 0.032 in) if necessary,
adjust it.
6. Make sure that the washer is in good
condition. Fit the washer and screw the
spark plug finger-tight to avoid damaging
the thread.
7. Tighten using the spanner supplied with
the tool kit. Screw in each spark plug by
one half turn to compress the washer.
0.7 ~ 0.8 mm
(0.028 ~ 0.032 in)
TIGHTENING TORQUE
SPARK PLUG
15 ~ 20 N
·
m
(1.5 ~ 2.0 kgf
·
m)
PLUG REPLACEMENT GUIDE
Hotter type
Standard type
Colder type
CR7E
CR8E
CR9E
8. Fit the spark plug cap properly, to
prevent it coming off due to engine
vibration.
getting into the engine. Change the
spark plug if it shows cracks on the
insulating material, corroded electrodes
or excessive deposits.
CAUTION
The spark plug must be tightened
firmly, otherwise the engine may
overheat and severe damage may
occur.
Use recommended spark plug only.
A spark plug of the wrong rating may
shorten engine life and cause loss of
performance.