HYOSUNG GD250, Owner'S Manual

Page: 32 / 98

31
WARNING
③
DIMMER SWITCH
Change the direction of the head lamp
light.
■
“ ” : The head lamp high beam
comes on.
The high beam indicator lamp
also comes on.
■
“ ” : The head lamp low beam
comes on.
①
CLUTCH LEVER
The clutch lever is used for disengaging
the drive to the rear wheel when starting
the engine or shifting the transmission
gear.
Squeezing the lever disengages the
clutch.
②
“PASS ” SWITCH
Press the “PASS” switch to operate the
head lamp high beam for using when pass.
With the ignition switch in the “ON”
position, push the “PASS” switch to operate
the head lamp high beam.
LEFT HANDLE SWITCHES
④
TURN SIGNAL SWITCH
Using when left, right turn or change
direction.
■
“ ” Position
: Flash the left turn
signal lamp.
■
“ ” Position :
Flash the right turn
signal lamp.
■
“
△
” (OFF) :
P u s h i n g t h e “
△
”
position will stop the turn
signal lamp to operate.
Set the dimmer switch “ ” when
other vehicle is running in front or
against.
⑤
HORN SWITCH
Press the switch to operate the horn.
❷ ❸
❶
❹
❺
CAUTION
Use the clutch correctly.
Otherwise, the clutch may be worn
quickly.
CAUTION
Do not operate when the dimmer
switch
“ ” position.
CAUTION
Use the horn switch only in case of
needing.
CAUTION
Always use the turn signals when you
intend to change lanes or make a turn.
Always be sure to turn the turn signal
switch to the “OFF” position after
completing the turn or lane change.