HYOSUNG Aquila GT250 Ej, Service Manual

Page: 105 / 122

104
7-3-1 SERVICING INFORMATION
Complaint Symptom and possible causes Remedy
Engine lacks
power.
Defective engine internal / electrical parts
1. Loss of tappet clearance.
2. Weakened valve springs.
3. Valve timing out of adjustment.
4. Worn piston rings or cylinders.
5. Poor seating of valves.
6. Fouled spark plugs.
7. Incorrect spark plug gaps.
8. Clogged injectors.
9. Clogged air cleaner element.
10. Sucking air from throttle valve or vacuum hose.
11. Too much engine oil.
12. Defective fuel pump or ECU.
13. Defective pick-up coil and ignition coils.
14. Defective TP sensor.
Defective control circuit or sensor
1. Low fuel pressure.
2. Defective IAT sensor.
3. Defective pick-up coil.
4. Defective IAP sensor.
5. Defective ECU.
6. Defective TP sensor.
7. Defective GP switch.
Defective engine internal parts
1. Heavy carbon deposit on piston crowns.
2. Not enough oil in the engine.
3. Defective oil pump or clogged oil circuit.
4. Sucking air from intake pipes.
5. Use incorrect engine oil.
6. Defective oil cooler.
Lean fuel / air mixture
1. Short-circuited IAP sensor / lead wire.
2. Short-circuited IAT sensor / lead wire.
3. Sucking air from intake pipe joint.
4. Defective fuel injectors.
5. Defective ET sensor.
The other factors
1. Ignition timing too advanced due to defective timing advance
system (ET sensor, pick-up coil, GP switch and ECU).
2. Drive chain is too tight.
Adjust.
Replace.
Adjust.
Replace.
Repair.
Clean or replace.
Adjust or replace.
Clean.
Clean.
Retighten or replace.
Drain out excess oil.
Replace.
Replace.
Replace.
Repair or replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Replace.
Clean.
Add oil.
Replace or clean.
Retighten or replace.
Change.
Clean or replace.
Repair or replace.
Repair or replace.
Repair or replace.
Replace.
Replace.
Replace.
Adjust.
Engine overheats.