HYOSUNG 2700CE, Owner'S Manual

Page: 43 / 334

NH-2700 4. Operating Instructions
4 - 22
4) Add the receipt paper into the rod and then
insert the roll guide tightly again to fix it.
5) The shiny side of the paper should be faced up
to be printed properly and the metallic tension
guide should be surrounded with paper to reduce
the tension during feeding.
6) Insert the leading edge of paper between lower
guide and upper guide of the receipt printer
slowly. When the machine is initialized, the
paper is going to start feeding.
7) If the paper does not feed at all during
initializing, make sure that paper has a CLEAN
CUT at the end and the Thermal Print Head
(TPH) is closed as shown in left picture.
8) When finished loading paper, close the Front
Panel and remove the key.
Roll Guide
Upper Guide Lower Guide