manualshive.com logo in svg

HYOSUNG 2700CE, Owner'S Manual

Share
Download
HYOSUNG 2700CE Owner'S Manual Download Page 323

NH-2700                                                                     6. Appendix 

                                                                                              6-  128

I.1.3 Makeing SW Update media 

1) Make “UPDATE” folder in the USB memory drive or the SD Card. 
2) Make “NH2700CE” folder in the “UPDATE” folder. 
3) Make “PATCH” folder in the “NH2700CE” folder. 
4) Copy “UpdateInfo.dat” to under “PATCH” folder. (Optional) 
5) Make “ADVERTISEMENT” folder in the “PATCH” folder. 
6) Make “1024_600” folder in “ADVERTISEMENT” folder.   
7) Copy all image files to under “1024_600” folder.(check the file name) 
8) If you want to change receipt header image, Copy the receipt header image file. 

 

Summary of Contents for 2700CE















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands