HYOSUNG 2700CE, Owner'S Manual

Page: 221 / 334

NH-2700 6. Appendix
6- 26
Error Code Description Trouble shooting
4003300 Check sum error (No information is set)
1. Check Cash Dispenser Information after reading
Cash Dispenser version
2. Initialize
3. Initialize after executing Cash Dispenser
Information Set(‘P’) Command
4. Change Cash Dispenser B/D
4003400
Error of two sheets detecting sensor(CS5_1)
for initializing
1. Check CS5_1 Sensor Cable
2. Check second Dip Switch in Cash Dispenser B/D
3. Change CS5_1 Sensor
40036 Detect CS13 before initialization.
4003600
Error of CS 2, CS13 / LS2 sensor during
initialization 1.Remove a jammed note in CS13 / LS2 sensor.
2.Replace CS13 / LS2 sensor.
4003700
Error of 2 sheets detecting sensor (CS5_1 /
CS5_2) for dispensing
1. Check Cash Dispenser Board Segment
2. Initialize
3. Read data of ‘Read Double Sensor’
Command
4003800 Error in checking SRAM
40039
(INITIAL / DISPENSE) Solenoid Operation
Error before motor activation
4003900
Gate operation sensor (CS3 / LS8) error before
initial recovery
1. Initialize after removing notes or dust over Gate
2. Check CS3 / LS8 Sensor BKRT
3. Check CS3 / LS8 Sensor Cable
4. Exchange Sensor after abnormal operating
CS3 / LS8 Gate detecting Sensor
5. Replace Reject Solenoid 1
4003A00
When more than 5 sheets of cash dispensing
is required during a test
1. Check command that Cash Dispenser is
received
2. Check Cash Dispenser EP ROM Version or
specification
4003B00
When CS15A or CS 15B sensor is detected
as dark after initial recovery
1. Remove notes or dust on CS15A Sensor
2. Check CS15A Sensor Cable
3. Exchange Sensor after abnormal operating
CS15A Sensor
40040
(DISPENSE) Reboot 5 or more times due to
cassette separation
4004000 Cassette is removed during dispensing
1. Check the cassette catcher
2. Set the cassette properly
40041 (DISPENSE) Reboot 12 or more times