© Erwin Hymer Group North America, Inc.
If equipped with discharge hose (no hose valve):
o
Locate the discharge hose, inside the storage box, on
the driver’s side of the RV
.
o
Remove the waste water discharge hose from storage by pulling it straight out far enough to reach the dump.
o
Insert the waste water discharge hose outlet into the dump station waste receptacle.
o
Open the valve located on the forward side of the hose box by pulling the handle until it is fully extended.
o
Fully close discharge valve when done.
o
You should hose down the area around the end of the hose with a good supply of fresh water.
If equipped with discharge valve only:
o
Locate the
discharge valve on the driver’s side of the RV
.
o
Remove discharge cover by twisting counter-clockwise.
o
Connect one end of a portable sewer hose to the open discharge port and the other end into the dump station waste receptacle.
o
Open the discharge valve by pulling the handle until it is fully extended.
o
Fully close discharge valve when done. Remove sewer hose.
o
You should hose down the area around the discharge valve as well as the sewer hose with a good supply of fresh water.
o
Replace discharge cover and store sewer hose.
Extending the hose.
Open the dump hose valve.