© Erwin Hymer Group North America, Inc.
Alarms and Warnings
Propane and CO Alarm
Your vehicle has been equipped with a combination propane leak and carbon monoxide detection device for your protection. It is located near the floor in the
aisle, across from the rear seats.
Be sure the detector is operating while using your vehicle, especially when you are asleep inside it.
The detector runs on 12VDC and is operational whenever the battery disconnect switch is on. There is no separate switch for the detector. There is an
indicator light on the detector so that you can tell whether it's working or not. For this reason, whenever the vehicle is occupied the battery disconnect switch
should be in the on position.
Coach power on the Monitor Panel must be on for detector operation. Make sure your battery disconnect switch is on.
Do not disable, unplug or otherwise hinder the operation of this detector.
The detector has a useful service life; beyond which it needs to be replaced. See manufacturer’s owner’s manual for other op
erating instructions or look
for the sticker which is sometimes placed on the detector to see the replacement date.