![background image](http://html1.mh-extra.com/html/hymer/aktiv-2017/aktiv-2017_owners-manual_2192968021.webp)
21
© Erwin Hymer Group North America, Inc
Optional Folding Mattress for Front Bed
Step 1 - Positioning the front swivel seats:
With both the driver and passenger seats facing forward, lift the metal lever under the front of each seat,
and place the seats as far back as possible.
Pull the left plastic lever on the driver seat to place the seat-back in a vertical position.
Pull the right plastic lever on the passenger seat to place the seat- back in a vertical position.
Pull the right plastic lever on the driver seat to swivel the seat so that it is facing the passenger side.
Pull the left plastic lever on the passenger seat to swivel the seat so that it is facing the diver side.
Use the rotating knob to adjust the height of both driver and passenger seats to allow them to be at the
same height as the rear seat.
Step 2
–
Placing the bed support slats:
Place the short slat across the front seats.
Place the long slat across the rear seat. Be sure this slat extends all the way to the
side panel on the passenger side for greatest support.
Step 3
–
Placing the two bed base pieces:
Place the first bed base part so that it is flush with the table and the rear seatback.
Place the second bed base part so that the hook-n-loop strip lines up with the hook-n-loop strip of the first piece.
Secure the two bed base parts together by pressing along the hook-n-loop strips.