![background image](http://html1.mh-extra.com/html/hymer/3082515/3082515_instruction-manual_2192954009.webp)
9
• This appliance should only be connected to the DC mains with the voltage given on type sign on the appliance.
• Please don‘t use it in the bathroom or other place with high humidity.
• Examine the appliance frequently for signs of wear or damage. If there are such signs or if the appliance has been
misused or does not work, return it to the supplier before switching it on again.
• Generally check the item for symptoms of wear and/or damage before using it. In case you discover respective sym-
ptoms or if the appliance has been used improperly, do not continue to use the item but contact your dealer instead.
• For more information on how to use our products, please contact our customer service.
• It must only be supplied at SELV.
3 | Intended use
The technical safety of this product is assured by its compliance to European standards. The safety guidelines in the
instruction book must be followed. It is however not intended to treat medical conditions.
The electric blanket is placed on the mattress and under the sheet or inside the mattress cover by opening the zipper.
The hand is not as sensitive towards heat as other body parts. The heat is difficult to determine when touching with
your hands, other than the heat pillow. After 180 minutes it will automaticall shut-off. After the control unit for the
heat pad is removed, it can be washed up to 30°.
It is not designed for use with animals. Inappropriate use can damage the surface of the blanket and the fixing of the
heating wires. If damaged, the blanket must not be used anymore. In this case please contact the service hotline.
Caution:
• If you feel unwell or suffer any kind of injury, you must consult your doctor
.
• Please note your battery charge when you are self-sufficient and use the product. There is a risk that all power reser-
ves will be used up.
4 | Start-up
If this device is stored near freezing, allow it to acclimate to room temperature before use.
a
Please be sure all connections
are firmly in place.
b
Insert the plug
into the 12 Volt vehicle power socket. The product
is ready for use.
4.1 | Operating instructions
• The controller
has four levels:
Level 0: appliance off
Level 1: minimum heat
Level 2: medium heat
Level 3: maximum heat
Level 4: is the highest heat
• Green light is the lowest and red light is the highest setting
4.1.1 | Set control
• The selected setting is indicated by the coloured LED lights
on the handle
• Press once to turn the machine on and select the lower intensity level. The device‘s use indicator LED lights green.
• Each subsequent press of the controller key shifts the warming to the next higher stage, until the highest step is
reached. The device‘s use indicator LED lights red.
• The next press of the switch turns off the device. The use indicator LED turns off .
4.2 | Automatic shut-off
After 180 minutes it will automaticall shut-off. Should the unit used again, simply cycle through the entire program
and the unit will be started anew. Afterwards heat is produced for another 180 minute period.
5 | Cleaning and storing
• Unplug the appliance from the outlet and allow it to cool before storing in its box or a clean, dry place. Never pull the
plug out of the socket from the cable
4
6
1
2
3
GB
Summary of Contents for 3082515
Page 2: ...2 1 3 4 2 Komponenten Components Composants 6...
Page 14: ......