SPA
Page 23
4.4.4.5 Guest Mode
In g uest m ode on ly ve ry lim ited fu nctions of th e r emote co ntrol ar e
available. These are the d isplay of th e set-point steambath tempera-
ture and the switching on and off of the essence supply. Any access to
the main menu is not allowed with the exemption of the fast access key
with the essence supply symbol on it.
Guest mode is entered by selecting
Guest mode / Activate
. If activated,
access to the main menu is on ly possible after input of a 5-character
password to be defined on user level. Only then the guest mode is ter-
minated (when the remote control is switched off, it will remain in guest
mode until the correct password is typed in). The password set is dis-
played in the „Set password“ button field.
The submenu allows for the following actions:
•
Activate
•
Set password
Activate guest mode
»
Select
Activate
enterring guest mode
»
Quit the menu with
Set password for re-enterring user mode
»
Select
Set password
»
Type in a 5-character digit sequence as a password
»
Confirm by touching
OK
or discard the input by using the
ESC
button
4.4.5.6 Modbus
This submenu allows the selection of the following:
Searching
„Searching“ will start a cycle for the Spa remote control as the Modbus
master to lea rn about the slaves co nnected to the RS485-Bus of the
charging cradle.
Search Modbus for connected devices
»
Select
Searching
»
Connected Modbus devices will correspond by transmitting
their Modbus adress
»
Quit the menu with
Activate
Set password
xxxxx
Guest mode
Modbus
Searching