Page 30
10.6 Solenoid valve removal/
reinstallation and fine filter
cleaning
Removal
»
Shut off water supply and discon-
nect tap water hose cap screw con-
nection.
»
Remove connecting hose (20) from
cylinder base.
»
Detach electrical cable connector
from solenoid valve (25).
»
Unscrew solenoid valve mounting
screws.
»
Remove solenoid valve from
housing bore.
Fine filter cleaning
»
Remove fine filter from solenoid
valve tap water connection side and
clean under runnig water.
Reinstallation
»
Reinsert fine filter into solenoid
valve.
»
Reinsert solenoid valve with seal in
unit housing bore.
»
Bolt-down solenoid valve.
»
Reestablish tap water connection.
»
Reconnect electrical cable to sole-
nod valve.
»
Reattach connecting hose (20) to
cylinder base using clamp.
»
Turn on water tap.
»
Switch on unit and check for leaka-
ges after 15 to 30 mins of operation.
Risk of electrical shock!
Hazardous electrical voltage!
Follow safety instruction for work on live com-
ponents.
Leakages may invoke leak currents.
»
In case of leakage turn off power
supply and secure against being
switched on again.
»
Find leakage and eliminate.
»
Check again.
Solenoid valve
:$51,1*
