Page 62
8.9
Unlocking of a Released Thermo Sensor
(for heater element)
If a thermo sensor (for heater element) has released due to a
temperature too high, the red unlock button (P) protrudes a few
millimetres from its holder top. After the system has cooled
down, the thermo sensor may be unlocked by forcefully pressing
the unlock button (P) back down in its holder for a few millime-
tres.
8.10
Unlocking of a Released Thermo Sensor
(for Solid State Relay)
If a thermo sensor (for the solid state relay) has released due to
a temperature too high (>100°C +/- 5°K), the control reports the
„Thermo sensor activated“ fault. After the system has cooled
down, the thermo sensor may be unlocked by cautiously press-
ing the unlocking pin between the both plain connectors down
until there is a klick sound.
Unlocking
pin
Summary of Contents for HeaterCompact HC02
Page 69: ...Page 69 10 EC Declaration of Conformity...
Page 76: ...Page 76 13 Exploded View...
