![background image](http://html1.mh-extra.com/html/hyfire/taurus-tau-bs-01-bl/taurus-tau-bs-01-bl_manual_2192671004.webp)
LOCATION SELECTION
Select a location for the base sounder that conforms to your local applicable safety standards and that is in a good position for sending /
receiving wireless signals to / from the father
TAU
-
TRM
-
01
,
TAU
-
CEM
-
01
or
TAU
-
EXM
-
01
network device.
Mount the base sounder as far as possible from metal objects, metal doors, metal window openings, etc. as well as cable conductors, cables
(especially from computers), otherwise the operating distance may greatly drop.
The base sounder must NOT be installed near electronic devices and computer equipment that can interfere with its wireless communication
quality.
BATTERY COVER
To detach the battery cover, pull the tab highlighted in the following picture.
To reinstall the battery cover, insert its two hooks into the device
’
s recesses as indicated in the picture below; then block it by pressing down
the opposite side.
It is advisable to use the TAU
-
STK
-
01 survey kit
to locate a good wireless installation location.
Picture 2
Picture 3
Every time the cover is removed, the tamper
switch is released, causing a temper attempt
message to be sent to the control panel.
Always install the battery cover, since it is a vital part of
the anti
-
tampering feature.
Make sure the battery cover is safely fixed, blocked and
closed.
www.hyfirewireless.com
Hyfire Wireless Fire Solutions Ltd
-
Unit B12a, Holly Farm Business Park, Honiley,
Warwickshire, CV8 1NP
-
United Kingdom
4