hyfire TAURUS TAU-BS-01-BL, Manual, Page: 7 / 14

LINKING - WAKE - UP
“ Wake - up ” linking consists in associating one or more child devices to the Taurus system altogether in a single operation.
Wake - up is performed either through the TauREX software or the TAU - TRM - 01 / TAU - CEM - 01 keyboard - screen interface; it CANNOT be
done through TAU - EXM - 01 devices.
1) Create the “ virtual model ” of the base sounder device either on TauREX or on the TAU - TRM - 01 / TAU - CEM - 01 .
2) Power - up the base sounder (either “ first time use ” or “ recovery ”).
3) Set the Link / program switch OPPOSITE to “ ON ”.
4) Trigger the wake - up procedure either from TauREX or from the TAU - TRM - 01 / TAU - CEM - 01 .
5) Wait the end of the “ wake - up ” linking procedure.
6) Check on TauREX or from TAU - TRM - 01 / TAU - CEM - 01 for linking success.
Consult their user manual.
LINKING - ONE - BY - ONE
“ One - by - one ” linking consists in associating one child device at a time to the Taurus system.
This operation is performed either through the TauREX software or the TAU - TRM - 01 / TAU - CEM - 01 keyboard - screen interface; it CANNOT
be done through TAU - EXM - 01 devices.
1) Create the “ virtual model ” of the child device either on TauREX or on the TAU - TRM - 01 / TAU - CEM - 01 .
2) Trigger the linking procedure either from TauREX or from the TAU - TRM - 01 / TAU - CEM - 01 .
3) Power - up the child device (either “ first time use ” or “ recovery ”).
4) Set the child device ’ s Link / program switch OPPOSITE to “ ON ”.
5) Wait the end of the “ one - by - one ” linking procedure.
6) Check on TauREX or from TAU - TRM - 01 / TAU - CEM - 01 for linking success.
Consult their user manual.
L20 - TWBSXB - 1400 (vA.2) info@hyfirewireless.co.uk
7