Hydrotechnik MultiControl 4070, Operating Instructions Manual, Page: 8 / 39

Firmware Version 1.2 MultiControl 4070
8
Introduction
ENG
Intended use
The MultiControl 4070 instrument is a portable measuring system for the re-
cording and storage of measurement data from sensors connected to the
measuring instrument. The measurement data can then be read and evalua-
ted using the HYDROcom6 software.
A variety of different sensors can be connected to the measuring instrument.
 Connections on page 11
 Technical data on page 22
Any other use of the measuring instrument is considered improper. If you have
any question or want to use the measuring instrument for a different purpose,
please do not hesitate to contact our service staff. We will be happy to assist
you with any possibly necessary configurations.
Warranty
In accordance with our warranty conditions, we guarantee the condition wit-
hout defects for this measuring instrument for a duration of six months.
Wearing parts and storage batteries are excluded from this warranty. The war-
ranty becomes void if repair work or interventions are executed by
unauthorized persons.
Within the warranty period we will repair damage or defects that are caused
by a manufacturing fault. We only accept warranty claims if they are reported
to us immediately, but no later than six months after delivery. The warranty be-
nefit is by our choice through free repair of defective parts or replacement with
sound parts.
Please send the instruments for which you have made a warranty claim post-
age-paid and with a copy of the invoice or the delivery slip to
HYDROTECHNIK customer service. You can find the address at the end of
this manual.