Hydrotechnik MultiControl 4070, Operating Instructions Manual, Page: 23 / 39

Firmware Version 1.2 MultiControl 4070
23
Commissioning
ENG
Commissioning
Before you take measurements with the instrument, you must check that all
parts have been delivered in their entirety and are intact. You must charge the
batteries and read these operating instructions.
Connecting and configuring the sensors is described in the following sections:
 Connect sensors on page 28
 Configure and operate the instrument on page 29
Check delivery
The measuring instrument is delivered by HYDROTECHNIK and transported
by suited shipping companies. At the time of delivery, you should check:
• Does the number of delivered items corresponds with the
HYDROTECHNIK delivery note?
• Is the packing free of visible damage?
• Are measuring instrument and accessories free of visible damage?
• Are there any indications of rough treatment during transportation (e.g.
burn marks, scratches, color)?
To maintain all claims against the shipping company you should document all
possible transportation damage (e.g. by taking photos and signing a written
protocol), before you unpack the measuring instrument.
HYDROTECHNIK is not responsible for transportation damage and will assu-
me no liability.