Hydrotechnik MultiControl 4070, Operating Instructions Manual, Page: 35 / 39

Firmware Version 1.2 MultiControl 4070
35
Operation
ENG
Reset device
All user-defined parameters and settings (channels, memory, etc.) will be de-
leted by resetting the instrument. All data on the SD card remain unaffected
(measurement series, sensor and CAN databases, projects, test sequences,
databases from test sequences, etc.).
 Reset instrument
1 Switch on the instrument with the ON/OFF button and keep the button
pressed.
The green LED starts to flash.
After another 4 seconds, the green LED extinguishes and the red LED
starts flashing.
2 Release the button and then press the button 5 times.
Each time the button is pressed, the green LED flashes to confirm the
action.
The instrument is then reset.
