Hydro
Tab
Marine Engineering
Air Unit Max Installation
WARNING:
PLEASE INSURE THAT THE AIR UNIT IS INSTALLED ACCORDING TO THE IP30 LIMITATIONS.
IP30 :
Protected from tools and wires greater than 2.5 millimeters. Not protected from liquids.
WARNING:
FREE OF EXPLOSIVE OR FLAMMABLE GASES
THE AIR UNIT MUST BE INSTALLED IN A COMPARTMENT
.
THE AIR UNIT MUST BE INSTALLED 20cm BELOW ANY SURFACE THAT LOCATES ABOVE IT .
WARNING:
1
2
444mm
Drill Ø3
You will need
Fig.1:
Find a clear surface, place the Air Unit
Max, and mark the holes with a pencil.
Fig.2:
Make holes with Ø3 drill.
Fig.3:
Mount the Air Unit Max with the given
screws.
2
3
M4,8x25
WARNING:
DO NOT MOUNT
the Air Unit upside-down
20 cm
20 cm
