HYDROSCAND AutoCal H24D, User Manual

Page: 18 / 44

H24/H32D AutoCal USER MAnUAL EDiTiOn i 2013-02-27
18
Change direction of motor rota -
tion.
Add oil.
Service is required,
contact Hydroscand
Machine AB.
Lubricate.
Add oil.
Change oil.
Change.
Lubricate.
perform calibration.
Check/Change.
check fuses and connection.
check circuit breaker
6. trouble shooting
Problem
Machine starts but cylinder will
not move:
Low crimping force:
inconsistent crimping
measurements:
Machine will not start:
1. Incorrect motor
rotation.
2. Low oil level.
3. poor oil quality
1. insufficient lubrication.
2. Low oil level.
3. poor oil quality.
4. Bypass valve not working.
1. insufficient lubrication.
2. The machine need to
be recalibrated.
3. Linear sensor
malfunction.
1. no power.
2. Motor protection
function has been
triggered.
Reason Solution