15
Install Cassette / Enclosure:
1. Remove the Front Cover. Then remove the “L” Tube as shown in illustration below.
2. Un-screw the 8/M8 bolts from the Cassette Enclosure in numbered order, then remove the Enclosure Top.
3. Carefully install Cassette into Enclosure observing proper O-Ring placement. An FDA water compatible
silicone lubricant is required on the O-Ring.
4. Reinstall Cover and tighten bolts. 26 lbf-in or 2.2 lbf-ft (30 kgf-cm) of torque is required on the bolts.
Mount HDI:
1. Carefully lift the HDI and positon the HDI so that the prongs are a few inch above the mounting bracket.
2. Slowly lower the HDI until the prongs engage with the mounting bracket.
3. Move the HDI to the left to engage the bracket slots. Confirm that the mounting bracket slots and the prongs are
engaged in the secure position.
