HYDRO-VIEW QUICK START
HYDRO-VIEW USER GUIDE
D0022
REV 1.06
27
Changing operating values
Hydro-View operating values (or
parameters
)
are organised in lists of related items. The
method for changing these values is described below...
⇒
Choose the list you wish to examine from the
Main menu
and then select the item
you wish to change by highlighting it using the soft-keys...
•
Figure 9 - Selecting parameters
⇒
Press again, the soft-key legends will change to allow the value to be edited in
a
pop-up
window...
•
Figure 10 - Changing a value
⇒
Holding down
or
will allow the value to be changed rapidly - the rate
accelerates as you hold the key down. The value is bounded at lower and upper
limits beyond which it cannot be changed and sometimes these limits will be based
on the current values of other items.
⇒
Press or
keys to accept the new value or press
to restore the previous
value.
If nothing happens when you press
over a highlighted value, you do not have
permission to change this value and will need to enter the appropriate access code.
Summary of Contents for Hydro-View HV02
