HYDROMEA Luma X, Manual

Page: 5 / 28

5 LUMA X 3/2022
2.1.1 Windows 10 setup
On Windows 10 this is set up as follows:

go to → Settings → Network & Internet → Ethernet (in left column) → Network and
Sharing Center (in right column) → Change adapter settings (in left column) → right click
on Ethernet adapter → Properties → select Internet Protocol Version 4 (TCP/IPv4) →
Properties

set the address as shown in Figure 2
Verifying the IP address setting:

Open a command line: → Windows PowerShell

Type: ipconfig /all
Figure 2: Windows 10 network settings