6
LUMA X
3/2022
You should see the IPv4 address setting shown in Figure 3
Figure 3: IPv4 address settings for LumaConf
On the remote PC, repeat the procedure, but set the IP address to 192.168.102.103.
2.1.2
LUMA X setup
Once the host computer’s IP address is set correctly the connection to the LUMA X can be
tested.
Connect
only one
LUMA X to a computer via an Ethernet connection using Hydromea’s
power/data cable.
Connect the LUMA X to a suitable supply voltage (12 V – 36 V) using Hydromea’s
power/data cable.
(Optional step) To test that the IP address has been set correctly, the computer should
now be able to ping the LUMA X on its default IP address 192.168.102.101 and the
modem should respond to it.
o
Windows 10: Open a command line: →
Windows PowerShell
o
enter
ping 192.168.102.101
