Hydromatic S4LRC, Installation And Service Manual, Page: 10 / 16

10
1 19101A010 Capscrew 8
2 00073-001-1 Wire Connector 3
3 14981-001-1 Pipe Plug 1
4 13425-016-1 Nameplate 1
5 04580-001-1 Drive Screw 3
6 01664-008-1 Pipe Plug 3
7 00589-004-1 Bolt Eye 2
8 01124-002-1 Jam Nut 2
9 00975-005-1 Retaining Ring 1
11 00834-002-1 O-Ring SC 2
12 00568-001-1 Screw Cap 2
13 02603-000-3 Stator Ring 1
14 06106A051 Capscrew (15 & 20 HP 4 Pole) 8
00178-005-1 Capscrew (All Others) 8
15 00975-008-1 Retaining Ring 1
16 02595-003-2 Housing Seal (Present) 1
18 00150-040-1 O-Ring SC 1
19 02596-000-2 Seal Plate (Prior to 3/1/74) 1
02596-003-2 Seal Plate (Present) 1
20 01957-000-1 Shaft Seal Ceramic SC 1 or 2
01957-002-1 Shaft Seal Opt. Carbide C 1
(Bottom Seal Only)
26 02855-001-1 Key 1
27 01945-000-1 Shaft Holding Washer (Up to 25 HP) 1
00156-011-1 Shaft Holding Washer (25–35 HP) 1
28 570-018-1 Capscrew (Up to 25 HP) 1
04834-000-1 Imp. Nut (25–35 HP) 1
29 02921-001-1 Flat Hd. Screw 4
30 06958-000-2 Impeller 12" Dia. 1
06958-001-2 Impeller 11.5" Dia. 1
06958-019-2 Impeller 11.25" Dia. 1
06958-014-2 Impeller 10.31" Dia. 1
06958-004-2 Impeller 10" Dia. 1
06958-013-2 Impeller 9.25" Dia. 1
06958-012-2 Impeller 8.63" Dia. 1
06958-011-2 Impeller 7.88" Dia. 1
31 00150-026-1 O-Ring SC 1
33 10783-000-2 Volute 1
34 00150-003-1 O-Ring SC 1
35 08472-003-5 Sensor Assy. (Present) 1
36 02602-000-3 Sleeve SC 1
37 00975-006-1 Snap Ring 1
38 19105A033 Capscrew 8
40 00150-025-1 O-Ring SC 1
41 00065-026-1 Lower Bearing (Present) 1
42 00568-006-1 Bolt 8
45 02597-002-2 Motor Housing for use with 1
20 HP & below
04832-001-2 Motor Housing for use with 1
25 HP & above, 15 HP 1150 RPM
46 RTF Stator 2 to 5 HP, 230/460/3/60,
870 RPM VFD Stator 1
RTF Stator 2 to 5 HP, 200/3/60,
870 RPM VFD Stator 1
RTF Stator 2 to 5 HP, 575/3/60, 870
RPM VFD Stator 1
RTF Stator 3 to 15 HP, 230/460/3/60,
1150 RPM VFD Stator 1
RTF Stator 3 to 15 HP, 200/3/60,
1150 RPM VFD Stator 1
RTF Stator 3 to 15 HP, 575/3/60,
1150 RPM VFD Stator 1
RTF Stator 10 to 20 HP, 230/460/3/60,
1750 RPM VFD Stator 1
RTF Stator 10 to 20 HP, 200/3/60,
1750 RPM VFD Stator 1
RTF Stator 10 to 20 HP, 575/3/60,
1750 RPM VFD Stator 1
RTF Stator 25 to 35 HP, 230/460/3/60,
1750 RPM VFD Stator 1
RTF Stator 25 to 35 HP, 575/3/60,
1750 RPM VFD Stator 1
47 RTF Rotor & Shaft, 2 to 5 HP, 870 RPM 1
RTF Rotor & Shaft, 3 to 15 HP, 1150 RPM 1
Ref. Part Part
No. No. Description Qty.
RTF Rotor & Shaft, 10 to 20 HP, 1750 RPM 1
RTF Rotor & Shaft, 25 to 35 HP, 1750 RPM 1
48 06000-003-5 Wire & Terminal Assy. (Prior to 5/1/78) 1
06000-021-1 Wire & Terminal Assy. (Present) 1
49 00065-006-1 Upper Bearing 1
50 01006-001-1 Wire Conn. 230/460V 9
01006-001-1 Wire Conn. 200/575V 3
51 00282-001-1 Wire Connector 3
52 00150-007-1 O-Ring SC 1
53 00853-000-1 Wire Conn. 200V 10/4 Cord 3
02494-000-1 Wire Conn. 200V 8/4 Cord 3
02494-000-1 Wire Conn. 230V 4
00853-000-1 Wire Conn. 460V 10/4 Cord 6
02494-000-1 Wire Conn. 460V 8/4 Cord 3
00853-000-1 Wire Conn. 460V 8/4 Cord 3
00853-000-1 Wire Conn. 575V 10/4 Cord 3
02494-000-1 Wire Conn. 575V 8/4 Cord 3
54 06237-000-5 Conn. Box Assy. 230/460V 1
06237-001-5 Conn. Box Assy. 200/575V 1
55 05465-040-5 Cord Cap Assy. 30' Dual 10/4 1
05465-041-5 Cord Cap Assy. 30' Dual 8/4 1
05465-042-5 Cord Cap Assy. 30' Dual 6/3 1
05465-043-5 Cord Cap Assy. 30' Dual 4/3 1
56 00150-012-1 O-Ring SC 1
57 00064-005-1 Bearing Spring 2
(None Required Prior to 2/14/78)
58 07665-001-1 Spacer for New Style Stator 1
3 to 15 HP, 1150 RPM
58 07665-000-1 Spacer for New Style Stator 1
10 to 20 HP, 1750 RPM
59 02583-002-1 Pipe Plug 25 HP & Up 2
51700-019-7 Seal Kit
51700-319-7 Carbide Seal Kit
60 24709110000 Paraffinic Oil O
ORDERING REPLACEMENT PARTS: Product improvements are made from time to time. The latest part design will be fur nished
as long as it is in ter change able with the old part.When ordering re place ment parts, always furnish the fol low ing information:
(1) pump serial num ber, (2) pump model and size, (3) part description, (4) part number, (5) im pel ler diameter (if ordering impeller),
(6) quan ti ty required, and (7) shipping instructions.
Ref. Part Part
No. No. Description Qty.
Ref. Part Part
No. No. Description Qty.
S4LRC
Parts List
NOTE: S — Parts in Seal Kit. C — Parts in Carbide Seal Kit. RTF — Refer To Factory
O — Amount of oil required will vary between 11 and 13 qts. depending on stator size. Fill oil to above motor windings.
For use with product built with GE motor.