Hydromatic NSPG 200, Installation And Service Manual, Page: 6 / 8

6
1 05401-010-2 Head - Suction 1
2 05402-011-2 Volute 1
3 07033-012-2 Impeller 1
4 05405-002-5 Cutter, Lower Radial 1
5 05506-001-2 Cutter, Upper Axial 1
6 05407-001-2 Cutter Ring, Stationary 1
7 05408-010-2 Seal Housing 1
8 05409-012-2 Motor Housing, GE Motor 1
05409-014-2 Motor Housing, Emerson Motor 1
9 05410-011-2 Bearing Cap, GE Motor 1
05410-013-2 Bearing Cap, Emerson Motor 1
10 05404-010-5 Seal Plate & Lower Bearing 1
11 05413-001-1 Gasket S 1
13 05570-003-1 Impeller Washer 1
14 21573C104 Stator 1/200 Volt GE 1
21573C100 Stator 1/230 volt GE 1
21573C101 Stator 3/200 volt GE 1
21573C102 Stator 3/230/460 volt GE 1
21573C103 Stator 3/575 volt GE 1
15 Rotor & Shaft w/bearing
10832-017-5 1 Phase GE 1
10823-022-5 3 Phase GE 1
16 00300-000-1 Upper Shaft Seal 1
17 00975-002-1 Snap Ring 1
18 04917-001-1 Lower Seal, Rotating S 1
19 04918-001-1 Lower Seal Seat S 1
20 06420-000-1 Pin 1
21 13425-074-1 Nameplate 1
22 13188-000-1 Shim .005" AR
23 06421-006-5 Cord Cap Assy , 25' single 1
24 00073-001-1 Wire Connector, all 1 Phase
and 200/575 volt 3 Phase 3
00073-001-1 230 volt 3 Phase 4
00073-001-1 460 volt 3 Phase 6
27 00150-008-1 O-Ring, used with GE Motor S 1
00150-046-1 O-Ring, used with Emerson Motor 1
28 05876A120 O-Ring S 1
30 00150-029-1 O-Ring S 1
31 00019-001-1 Screw 4
32 00176-010-1 Capscrew 2
33 00101-020-1 Capscrew 2
35 00101-019-1 Capscrew 9
36 01130-008-1 Impeller Screw 1
37 00517-009-1 Socket Head Screw 3
39 00025-009-1 Stator Screw, GE Motor 4
00025-008-1 Stator Screw, Emerson Motor 4
40 00030-013-1 Machine Screw 3
41 00114-006-1 Hex Nut 2
Ref. Part Part
No. No. Description Qty.
42 04580-001-1 Drive Screw 2
44 00177-002-1 Lockwasher 4
47 00087-007-1 Pipe Plug 1
48 00013-007-1 Adjustment Screw 2
49 00834-015-1 O-Ring S 1
52 00156-029-1 Flat Washer 1
55 05454A009 Lock Washer 4
56 05414-000-3 Brg Retainer Plate 1
57 07167-001-1 Bearing 1
58 00156-022-1 Flat Washer 1
59 19100A004 Capscrew 1
60 00156-012-1 Flat Washer 1
61 00119-008-1 Pipe Plug 1
51700-059-7 Seal Kit S 1
24709110000 Paraffinic Oil
Notes: S — Parts in Seal Kit C — Parts in Carbide Seal Kit I — Parts in Impeller Kit R — Parts in Rebuild Kit *Consult Factory
ORDERING REPLACEMENT PARTS: Product improvements are made from time to time. The latest part design will be furnished
as long as it is interchangeable with the old part.When ordering replacement parts, always furnish the following information: (1)
pump serial number, (2) pump model and size, (3) part description, (4) part number, (5) impeller diameter (if ordering impeller),
(6) quantity required, and (7) shipping instructions.
Ref. Part Part
No. No. Description Qty.
Ref. Part Part
No. No. Description Qty.
NSPG 200
Parts List