Installation
Sec. 3 Pg. 2
Step
Procedure
1.1
Holding the Bottom Plug [5] into the HP PRO Assy as shown, run the SS Connecting Bolt [1] and Flat Washer
Through the Top Plug [4] and Mooring Link
-
Universal [4] and thread into Bottom Plug. Tighten bolt until top and
bottom plugs are in contact with main body.
NOTE: DO NOT USE AN IMPACT WRENCH FOR FINAL
TIGHTENING. FEEL THE BOTTOM PLUG AND VERIFY IT IS IN CONTACT WITH THE HP PRO
BODY. OVERTIGHTENING CAN CAUSE INSERT TO PULL OUT OF BOTTOM PLUG. (TIGHTEN
TO 15
-
20 FT/LBS)
Installation Instructions
Universal Dock
Fig E.
HydroHoist Marine Group
Model: HYDROPORT PRO
ITEM #
PART NUMBER
DESCRIPTION
QTY.
1
4150009
BOLT 1/2
-
14 X 15 ALL THREAD
2
2
2090208
FLAT WASHER 1/2
4
3
4150030
PLUG
-
TOP HP SERIES
2
4
4150060
MOORING LINK
-
FIXED DOCK
2
5
4150035
PLUG
-
BOTTOM HP SERIES
2
