Operating Instructions
Sec. 4 Pg. 1
Operating Instructions
Loading (
WARNING
:
Only load PWC when HP PRO is unoccupied
.)
1.
Approach HP PRO at idle speed only.
2.
Position bow of PWC up against Keel Guide.
3.
Apply necessary throttle to drive upon the platform until the bow of PWC rests on the
bow bumper of HP PRO.
4.
To secure the PWC, dismount from the watercraft and connect the strap hook through
the front mooring eyelet of PWC.
Launching
1.
Release strap hook from front mooring eyelet of PWC.
2.
Board PWC and shift weight towards rear of watercraft.
3.
Apply a rocking motion to initiate the launch.
4.
If PWC will not launch after rocking motion is applied, exit the PWC and move to the
front of the HP PRO. Grasp the front of the PWC while lifting up and pushing back at
the same time. After the launch is initiated, board the PWC and apply rocking motion.
HydroHoist Marine Group
Model: HYDROPORT PRO
