NOTE: When operating in a vertical position
(and not mounted on the wall), the handle
must be positioned flush with the bottom of
the unit for maximum support (Fig. F).
Fig. D
Fig. E
5. Slide ballast onto screws. (Figs. D & E)
Fig. F (Standing)
The reset buttons work based on input power.
For 120v only one reset will trip if there’s an
issue, for 240v both may trip. The reset buttons
also work as thermal cutoffs, and may trip in case
of an overheating situation. After a reset button
trips, wait 15 minutes before pressing the reset
button. If after resetting the ballast, the problem
continues, please contact your retailer for repair
or replacement instructions.
Resetting the Ballast
Installation (cont.)
5