Hydro systems 3000 Series User Manual Download Page 3

3

1.OO overview

1.O1 Safety Precautions

WARNING! 

Please read precautions thoroughly before operation. Meet all applicable local codes and regulations.

THANK YOU FOR YOUR INTEREST IN OUR PRODUCTS

Please use this equipment carefully and observe all warnings and cautions.

• 

Both the unit and its peripheral elements must be handled by qualified technical personnel.

• 

Make sure the installation is carried out according to the current regulations of the state, county and city.

• 

Do not mount the unit on an irregular or unstable surface.

• 

This unit is designed to work in a vertical position.

• 

The unit must be installed in an area with adequate clearance, far from possible impacts, electromagnetic noise sources 

and pipelines of gas, steam or water.

• 

The top of the cabinet is not a shelf! Do not leave objects on the unit.

• 

Warranty is voided if the user modifies, adds or suppresses any feature of the unit.

• 

All components involved in maintenance tasks must be the ones registered in the spare parts list supplied by the 

manufacturer. Otherwise the Warranty is void.

• 

The installation of the dosing system must be performed according to the instructions of this manual.

• 

Main electrical power supply must be 110-230 VAC at 50 Hz/60 Hz.

• 

The units ship with the circuit breaker (in the control cabinet) in the OFF position. Switch it ON once all electrical wiring is 

complete.

• 

Always use wires in good condition.

• 

The water supply to the unit must conform to the specifications of this manual.

• 

The unit should be configured according to the programming manual.

• 

All chemical products must be stored in approved container, at a safe distance from the unit.

• 

The handling of chemical products requires the proper safety measures such as protective glasses, mask and gloves.

1.O2 Overview

The Multi-Washer 3000 Series with EvoClean is designed to dose laundry chemicals to multiple washer extractors. The 

system combines the proven Hydro Multi-Washer controller with the low-maintenance and highly accurate EvoClean 

dispenser. 

The number of chemical products that can be used with a single unit can be four (4), six (6), or eight (8). Regardless of the 

number of products, the maximum number of washers the products can be distributed to by a single unit is three (3) for a low 

flow EvoClean.

All the components of the system are consistent with general purpose industry standards, and the materials of construction 

are compatible with all normal laundry products.

Because the EvoClean does not rely on squeeze tubes to deliver product, it provides reliable, accurate and repeatable 

product dosage that does not degrade over time. The system excels at dosing small volumes (below 90 ml / 3 oz) and 

requires significantly lower maintenance than traditional pumping systems.

The Multi-Washer 3000 Series with EvoClean has three major components:

• 

The EvoClean dispenser with pickup tubing for four (4), six (6), or eight (8) products.

• 

Distribution manifolds (mounted separately) with valves going to each washer.

• 

A controller that takes all signals and controls the valves and pumps, to precisely dose the chemicals to each washer.

When a qualified signal is detected by the control cabinet the unit will dose the appropriate products according to the settings 

of the formula and washing phase being executed.

Summary of Contents for 3000 Series




















Reviews: