Hydro-Pro + premium 7, User And Service Manual

Page: 49 / 196

- 46 -
10M Signal wiring
1. Take one side of the 10M Signal wire,
to connect with the controller.
2. The other side needs to be pulled
through the hole, like the third picture
shows.
3. Then connect to the PC board inside
the machine : the brown one --- first
joint; the blue one --- second joint; the
yellow one --- third joint.
In strong sunny and heavy rainy days, it
is suggested to use the 10 meter signal
wire to install the controller indoors.
Cable wiring
1. Connect the power supply wire
through the white hole like the picture
shows.
2. Fix the other side on joints inside the
electric box.
Water pump wiring
1. Connect the water pump wire through
the white hole marked
2. Fix the other side on joints inside the
electric box.
3.With the connector 1 and 2 you can
pilot the water filtration through the
timer of the filtration (dry contact)