32
T2™
Refer to Figure 26
Disassembly
1. Remove the expansion tank hose (141).
2. Remove the O-ring (142) from the expan-
sion tank
fi
tting (140) and discard.
3. Remove the expansion tank
fi
tting (140).
Inspection
1. Inspect the
fi
tting for damage and replace
if necessary.
Assembly
1. Install the
fi
tting into the main housing. Refer
to torque chart on page 15.
2. Install a new O-ring (142) onto the
fi
tting.
3. Place the expansion tank hose (141) onto
the
fi
tting (140).
EXPANSION TANK HOSE AND FITTING
Figure 26, Expansion Tank Hose and Fitting
141
142
140
