T2™
23
RH AXLE SHAFT
Refer to Figure 15
Disassembly
1. Remove all items previously discussed, in
their recommended order.
2. Remove the retaining ring (109) and dis-
card.
3. Remove the lip seal (110) and discard.
4. Remove the outboard bushing (106).
5. Remove the axle shaft (103) in the direction
of arrow.
6. Remove the inner bushing (105).
Inspection
1. Inspect the axle shaft for wear or damage.
Replace if necessary.
Assembly
1. Assemble items in reverse order of disas-
sembly.
NOTE:
To protect the lip seal from possible
damage when installing into the bore
and over the axle shaft, apply a protec-
tive covering over the splines, sharp
corners and/or keyway of the axle shaft
(e.g., cellophane, tape, etc.). Remove
protective covering after installation.
Figure 15, Axle Assembly
106
2
103
110
109
100
101
105
