9
7.
Place a 3/8” flat washer
⑪
on each of the four 3/8” tap bolts
③
and insert the bolts
through holes in floor bracket
⑧
. Two bolts & washers on each floor bracket on each end
of the tank.
8.
Under the van, place back-up plate
⑬
on each bolt and secure to floor using the 3/8” lock
washer
⑩
and 3/8” nut
⑭
.
9.
Connect inlet water fittings, water supply pump, overflow fittings, outlet water
fittings and hoses as needed.
10.
Fill tank 1/3 full of water and check hold down rods and re-tighten as needed.
Check for leaks drain tank and reseal fittings as needed.
3
8
11
10
13
14
3
AP36
AP38
