HydrINS 2 / HydrINS 2 Mini flow meter
Installation Manual
Page 5 / 79
Qualified personnel:
The electromagnetic insertion flow meter described in this document must be handled only by
personnel qualified for each specific task. The documentation concerning this task must be obeyed.
This applies in particular to safety instructions and warnings. Thanks to their training and experience,
qualified persons are able to recognise and avoid the risks involved in handling this electromagnetic
insertion flow meter.
Use of the flow meter and its display unit for their intended purpose
Remember the following points:
HYDREKA products must only be used for the applications described in the catalogue and the related
technical documentation. Their use in conjunction with products and components from other brands
is subject to HYDREKA approval. For the products to operate properly and safely, they must be
transported, stored, installed, assembled, commissioned, used, and maintained in accordance with
good professional practice. The allowable environmental conditions and the recommendations in the
related documentation must be observed.
Disclaimer:
We have checked the compliance of the contents of the present document. We are however unable
to rule out the possibility of any discrepancy, and cannot guarantee complete compliance. If any
errors are discovered during the use of this manual, we will make a note of them and make the
necessary corrections in the next edition.