HydrINS 2 / HydrINS 2 Mini flow meter
User Manual
Page 46 / 79
Figure 34: Wiring possibilities from a HydrINS 2 / HydrINS 2 Mini flow meter with Display (Mode 2)
Receiver
Cat. No. of cable used
Display A
CNT 120S
It is also possible to retrieve a pulse output from a Display on another pulse acquisition system
(standalone recorder, SCADA or remote management) by connecting the Display and the acquisition
system. To do this, use the same cables that were used to connect the HydrINS 2 / HydrINS 2 Mini
flow meter and acquisition system, to connect the acquisition system to the Display communication
military connector.
In the event of failure of the Display A power supply, the acquisition system will continue to receive
pulses proportional to the flow. The probe head contains a back-up battery.
CC_HYDUSBS-3
Computer, Tablet
Remote
manageme
nt
CNT 102S
CNT 93S
CNT 90S
Vista + (local
recorder)
Display A
Octopus LX
(communicating
recorder)
CNT 120S
(200 metres max)
To other recorders:
(please ask us)
(pulses)
(pulses)
(pulses)
(Communication)